...
Run the following command to connect to GlobalProtect:
No Format globalprotect connect --portal uavpn.albany.edu
- Enter your UAlbany NetID and password when prompted.
- After entering your UAlbany NetID and password, approve the Duo 2FA authentication on your mobile device with two (2) minutes(Duo Push or Phone Call. SMS not supported)you will receive an automatic push or phone callback (depending on your default Duo settings.) Refer to your device and authorize the Duo prompt.
Optionally, you may add a comma (",") to the end of your password and append a Duo factor option:
Factor Instructions push Perform a Duo push authentication to your Duo Mobile app on your mobile device phone Perform phone callback authentication sms Send an SMS passcode. The initial authentication will fail (see next row) A numeric passcode Log in using an SMS passcode previously sent by Duo (see above row), generated by the Duo Mobile app, or generated via a hardware token. Examples: "123456" or "2345678" For example, if you wanted to use an SMS passcode to authenticate (instead of Duo Push or a phone call, you would enter:
username: yournetid
password: yourpassword,sms
(this authentication step would fail, but you would receive an SMS message from Duo. You'd then repeat the operation, entering the passcode (example with 123456 sent by duo)username: yournetid
password: yourpassword,123456
Disconnect from GlobalProtect on Linux (Debian/Ubuntu)
...