...
Issue
When able to connect to UAlbanyWiFi, but the connection will repeatedly switch to “Limited” or "No Internet Access" when actually attempting to connect to a webpage.
Steps to Fix It:
...
Resolution
Attempt normal troubleshooting methods in order to connect. This includes- , including
- Checking and
...
- double checking user’s credentials (
...
- NetID and password)
...
- Resetting manual network settings
...
- Make sure that under the Preferred Network list, UAGuest or other non-UAlbanyWiFi campus networks is not listed above UAlbanyWiFi
...
If you have done all of these things and the issue still prevails, you can enable “Federal Information Processing Standards” in order to improve or overall fix to try to fix the network connection.
2) Click the “Wireless Network Properties” button.
Click over to the “Security” tab.
This is the display you should see.
Click “Advanced Settings.”
Click over to the “802.11 settings”
Now you will see this:
Check the “Enable
- From Control Panel, open Network and Sharing Center and click Manage Wireless Networks
- Open the Wireless Network Properties
- Go to the Security tab
- Click Advanced Settings
- Go to the 802.11 settings tab
- Check the Enable Federal Information Processing Standards (FIPS) compliance for this
...
- network box
...
- and click OK
...
- After reconnecting to the network, this may resolve the issue
...
Include Page | ||||
---|---|---|---|---|
|