Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 21 Next »

Windows

  1. Go to Start
  2. Click Run
  3. In the open box, type cmd and press Enter
  4. At the prompt, type "ipconfig /all" or "getmac -v" and press Enter. (Note: there is a space between ipconfig and the forward slash.)

  5. Locate your Ethernet or wireless adapter description. Under description, you will see the category labeled Physical Address. This is your MAC address that you will use for troubleshooting purposes. (Note: the MAC address is alphanumeric (0-9 and a-f), and consists of 12 characters.

    Example: 00-B0-D0-86-BB-F7

Mac

  1. Go to System Preferences
  2. Click Network
  3. Press Configure

  4. Locate your Ethernet adapter description. The Airport ID is your MAC address that you will use for troubleshooting purposes. (Note: the MAC address is alphanumeric, and consists of 12 characters.

    Example: 00-B0-D0-86-BB-F7


Need more help? Contact the ITS Service Desk.


  • No labels