Include Page | ||||
---|---|---|---|---|
|
Instructions
Info |
---|
Windows Mobile devices equipped with a WiFi card that supports WPA Enterprise encryption are able to access UAlbanyWiFi. |
- Navigate to Settings, then Connections, and click on Wi-Fi.
- The Configure Wireless Networks screen should appears. Click Add New.
- In capital letters, enter UAlbanyWiFi for the Network name. Then click Next.
- The Authentication needs to be WPA, and set Data Encryption to be AES Click Next.
- For EAP Type, the default setting should be PEAP. Leave this alone, and press Finish.
- You should be back at the Wi-Fi screen now. Click on the UAlbanyWiFi profile and choose Connect.
- The first time you connect, Windows will ask you for a User name and password. Type in your UAlbany NetID and password into the appropriate boxes. Make sure your NetID is typed in using lower-case letters. Leave Domain blank and check the box for Save Password
- It might take about 30 seconds, but the device should connect.
- If you want to change your saved password in the future, you can do so by going to the Wi-Fi tab, clicking on the profile, and choosing Remove Settings. This will erase all the settings (including your NetID and password), so you will have to follow these instructions again.
Technical Information: troubleshooting connection issues
Include Page | ||||
---|---|---|---|---|
|