WiFi Troubleshooting - Enable FIPS compliance in Windows

Owned by Former user (Deleted)
Last updated: Sep 13, 2021 by Lyons, Andrew H
1 min read

Issue

When able to connect to UAlbanyWiFi, but the connection will repeatedly switch to “Limited” or "No Internet Access" when actually attempting to connect to a webpage.

Resolution

Attempt normal troubleshooting methods in order to connect, including

  • Checking and double checking user’s credentials (NetID and password)

  • Resetting manual network settings

  • Make sure that under the Preferred Network list, UAGuest or other non-UAlbanyWiFi campus networks is not listed above UAlbanyWiFi

If you have done all of these things and the issue still prevails, you can enable “Federal Information Processing Standards” to try to fix the network connection

  1. From Control Panel, open Network and Sharing Center and click Manage Wireless Networks

  2. Open the Wireless Network Properties

  3. Go to the Security tab

  4. Click Advanced Settings

    Image illustrating the Advanced Settings button in the Wireless Network Properties window
    Image illustrating the Advanced Settings button in the Wireless Network Properties window

  5. Go to the 802.11 settings tab

  6. Check the Enable Federal Information Processing Standards (FIPS) compliance for this network box and click OK

    Image illustrating the check box to enable FIPS compliance
    Image illustrating the check box to enable FIPS compliance

  7. After reconnecting to the network, this may resolve the issue